Payment & Shipping Terms:
|Goods:||Laboratory Vacuum Tube Furnace||Max. Temp.:||1200℃|
|Operation Temp.:||1100℃||Heating Element:||Resistance Wire|
|Tube Material:||Quartz Tube||Insulation Material:||High Puity Ceramic Fiber Board|
|Furnace Application:||Lab ,univerisity Material Heating||Heating Rate:||1-20℃/min|
|Furnace Shell:||Double Shells With Fan Cooling||Furnace Type:||Split|
vacuum tube furnace,
quartz tube furnace
Vacuum tube furnace characters:
1.The furnace tube adopts quartz tube as carrier and the stainless steel flanges on its both ends are simple design, reasonable, easy to disassemble and convenient for entering and leaving sintered samples
2. The machine will send out an alarm signal to the over-temperature during the working process, and automatically complete the protection action.
3.The heating rate is fast, from room temperature to 1200 degrees, generally takes 50-70 minutes
4. Furnace material is high-purity alumina ceramic fiber materials, new assembly structure, no transformation in long term high temperature, sturdy and durable
5. The heating element is made of high-quality alloy wire, which can bear large load, stable and long service life
6. Electronic components are used Delixi products, with leakage protection, safe and reliable
7. Using intelligent PID temperature control instrument, with program function, can set the temperature rise curve, can be programmed 30 segments
8. When the instrument program is set, just press the run button and the next work will be completed automatically
9. It can be installed with a gas mass flowmeter, digital precise control of the gas.
Vacuum tube furnace main technical parameter :
|Product name and model||SP-1200T-54 vacuum tube furnace|
|Heating tube size(OD×L)||Dia50x400mm|
|Chamber insulation materials||light weight aluminum oxide fiber ceramic|
|Maximum temperature||1200°C working time ( < 3 hours)|
|Working temperature||400-1100°C (adjustable, for long time )|
|Temperature control||Intelligent 30 segments programmable and PID auto control|
|Heating rate||1-15℃/min (adjustable)|
|Heating element||resistance wire|
|Vacuum pump specifications model||0.5A, pumping rate 0.5L/S, power 120W|
|Furnace shell||Double shell with fan cooling|
|Temperature display mode||Four Figure Liquid Crystal Display|
|Working power||AC 1-phase, 110V-240V, 50Hz/60Hz|
|Spare function||installed computer communication module and RS485 communication interface,to realize the remote control. (If there need spare function, cost will be added|
Stanard model of SP 1200C vacuum tube furnace
|Model||Heating zone (OD×L mm)||Work power||Vacuum pump specifications|
One year limited warranty with lifetime support, excluding heating element and ceramic tube damaged by user.
Attention: Any damages caused by the use of corrosive and acidic gases, and any damage from wrong operate and use are not under the coverage of One Year Limited Warranty.
♥ We are a manufacturer in China. So we can control the cost well.
♥ We use the top material in our furnace, imported ceramic fiber and accuracy temperature controller.
♥ We supply good service after sale, you can be assured about that
Contact Person: Vera Zuo