0.7KWh / Kg Induction Melting Furnace 15tons / H Circulation Water Electric Heating

250kg High Temperature Medium Frequency Induction Melting Furnace Electric Heating

 
1. Applications of induction melting furnace : used for melting stainless steel, alloy steel, carbon steel.
2. Features of this furnace : fast speed of melting, saving energy, less burnt loss, pure molten liquid.
3. The aluminum frame of electric is adopted to small capacity smelting furnace with reasonable structure and small capacity, convenient installation and simple maintenance, low maintenance cost.
4. The induction coils of fast melting furnace are double paralleled winded with prolonged coil to make sure the half capacity of furnace molten liquid can be heated by full load power output which will improve overall efficiency. Cooling system is equipped along with the induction coil prolong the lining life.
5. The inner wall of induction coil of large capacity electric furnace is cast with imported high temperature resistant insulation material to prevent of furnace lining leakage.
 
Environment and condition usage for induction melting furnace 
1. Temperature should be at 2℃ to 35℃.
2. The relative humidity no more than 90%
3. Installation height not higher than 1000m
4. No conductive dust and corrosive gas in working place.
5. No explosion and violent vibration room around the place
6. The temperature of the the cooling water should no less than 10℃,not more than 30℃,hardness<8 degree,
Ph<degrees,pressure>0.2Mpa.
7. Power supply must be AC 380V 3-phase 50Hz/60Hz,Voltage fluctuation 370-410Volts.
 
Advantages of intermediate frequency induction melting furnace:

• High melting efficiency, good power saving effect, compact structure and strong overload capacity;
• The temperature around the furnace is low, the smoke dust is less, and the working environment is good;
• The operation process is simple and the smelting operation is reliable;
• Uniform metal composition;
• The melting temperature rises quickly, the furnace temperature is easy to control, and the production efficiency is high;
• The furnace has high utilization rate and convenient variety change

 Technical parameter of induction melting furnace :

Warranty

· Our products are warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Across International will, at its sole options, replace any components that fail in normal use. Such replacement will be made at no charge to the customer for parts, provided that the customer shall be responsible for any transportation cost.

· This warranty does not cover consumables and failures due to abuse, misuse, accident or unauthorized alteration or repairs.

· Replacement will be shipped to you after photo or other evidence are provided and investigated