|
Product Details:
Payment & Shipping Terms:
|
| Product: | Gas Nitriding Furnace | Rated Power: | 90kw |
|---|---|---|---|
| Rated Temperature: | 650℃ | Usage: | Carbon Steel Parts |
| Temperature Uniformity: | +/-5C | Temperature Control Mode: | PID Control , Paper Less Recorder |
| Voltage: | 380/440V | Frequency: | 50/60HZ |
| High Light: | Pit Type Gas Nitriding Furnace,90kw Gas Nitriding Furnace,90kw vacuum nitriding Furnace |
||
Gas Nitriding Furnace application
Gas Nitriding Furnace Applicable for bright anealing tempering of carbon steel, alloy steel parts and magnetic materials in protective atmosphere, and for bright anealing of small batch of scrolling strips
Gas Nitriding Furnace features:
1. The rate of seepage is fast .
The nitriding process is to perform periodic pressure change in the furnace under low vacuum conditions. The atmosphere is kept fresh and active, and the nitrogen potential is also cyclically changed, so that one-stage nitriding has the advantages of two-stage and three-stage nitriding, and it is not necessary to adopt two or three. Segment nitriding, speeding up nitriding
2. Wide adaptability and uniform permeability .
The workpiece has a blind space, a T-shaped surface or a workpiece working surface in a very narrow slit. For a conventional positive pressure nitriding furnace, this is not conducive to the replacement and diffusion of the fresh atmosphere, and the nitriding effect of these parts is not ideal. The low vacuum pressure transformation technology allows the furnace gas to automatically diffuse into the tank, without dead ends. Blind holes, pores, and working faces at the die slits also provide the desired layer.
Technical parameter of RN-90-6 gas nitriding furnace :
| Gas Nitriding Furnace Well Type High Quality Industrial Oven | |
| Usage | Steel workpiece Gas Nitriding |
| Voltage | AC 380V 50/60Hz 3Phases |
| Chamber Size | dia. 900x1600mm |
| Rated Temperature | 650℃ |
| Temperature Accuracy | ±1℃ |
| Heating Element | 0Cr25Al5 Resistance Wire. |
| Controlling System |
1. 30 programmable segments PID auto control the process of heating, insulation and cooling. 2. TRIAC module to ensure the temperature accuracy to ±1℃. 3. Over temperature, overflowing and thermocouple broken alarm and power auto cut-off for protection. 4 Other electric components adopt Schneider, Siemens etc. |
| Furnace Chamber |
1. The refractory layer is building by 0.8 density high strength gather light mullite brick. 2. The insulation layer is 1260 type alumina fiber blanket and support by alumina bricks. 3. The composite structure chamber is composed by refractory brick and refractory fiber. |
| Furnace Shell, Tank and Basket |
1.Furnace shell: weld by steel material, anti-rust painting. 2. Furnace tank and basket: heat-resistance cast steel. |
| Furnace Cover |
1. Silicon rubber piece &compression bolt sealing, water cooling for sealing pieces. 2. Air intake & exhaust device with water cooling fan. 3. The airflow circulation forced by water cooling fan to ensure the uniformity of temperature and atmosphere inside furnace. 4. 10/25 hydraulic device for easily opening the furnace. 5. Two limit switches in the lifting shaft, auto turn off the fan power when opening the cover, auto turn off total when the cover is lifting to the top. 6. Special design blower to shorten the nitriding period and increase cooling rate. |
| Nitriding System |
1. Furnace tank: 304 stain steel, 5 mm thickness. 2. Dropping system: 3 kinds of liquid simultaneously, flow-meter and needle valve. 3. Cooling drum for processed work-piece. |
Stanard model of SUPER Gas nitriding furnace :
| Model | Rated Power (KW) | Working Size (D*H mm) | Working chamber size(mm) | Rated temp. | Rated voltage(V) |
| RN-35-6 | 35 | 500x650 | 200 | 650℃ | 380/440 |
| RN-60-6 | 60 | 600x1200 | 400 | 650℃ | 380/440 |
| RN-75-6 | 75 | 800x1200 | 550 | 650℃ | 380/440 |
| RN-90-6 | 90 | 800x1600 | 600 | 650℃ | 380/440 |
| RN-105-6 | 105 | 800x2400 | 1000 | 650℃ | 380/440 |
| RN-120-6 | 120 | 800x3000 | 1200 | 650℃ | 380/440 |
| RN-150-6 | 150 | 700x4000 | 2000 | 650℃ | 380/440 |
Warranty
Our warranty period comes from the machine begin to run normally and we will provide the whole life technology support to you for free.
All products sold by our company In warranty period,we will provide you the spare parts for free. Our engineer will help you do the aftersales through our remote control system.When out of one year warranty time, we will provide the spare parts with the cost price for the whole machine lifetime.
Contact Person: Ms. Vera Zuo
Tel: 86-13607649242
