Casting Vacuum Induction Metal Melting Furnace Small Automatic

    Small Automatic Casting Vacuum Induction Metal Melting Furnace

Introduction of  Automatic Casting Vacuum Induction Metal Melting Furnace

The automatic casting vacuum melting furnace is a small vacuum melting furnace developed by our company according to the actual experimental needs. It has a series of functions of automatic swing, automatic rotation, automatic casting and sample testing during the melting process. With infrared temperature measurement, the experimental data can be viewed in real time.

Application of Automatic Casting Vacuum Induction Metal Melting Furnace

The automatic casting vacuum furnace can melt metal materials (such as stainless steel, nickel-based alloy, copper, alloy steel, nickel-cobalt alloy, rare earth neodymium-iron-stilbium, etc.) under vacuum and protective atmosphere, and can also carry out vacuum refining treatment and precision casting of alloy steel , can also be used as pre-preparation equipment for direct reading spectrometer and X-ray fluorescence spectrometer analyte, can prepare various ores, oxides, ferroalloys, and can use two alumina crucibles at the same time (spin, swing + mold function) Melted to produce two ferroalloy samples at a time.

Main technical parameters of laboratory small vacuum Induction melting furnace

laboratory small vacuum Induction melting furnace Structure:

This vacuum furnace  is composed of furnace cover, furnace body, furnace bottom, crucible rotary mechanism, vacuum system and intermediate frequency power control system.

The furnace cover, furnace body and furnace bottom all adopt a double-layer water-cooled structure to keep the temperature of the furnace shell below 60°C.

The small induction furnace cover is opened manually, and there are observation holes and baffles on the furnace cover. In order to facilitate the addition of alloy elements during the melting process, an alloy feeder is specially provided on the furnace cover.

There is an induction coil in the furnace body, and the melt in the crucible can be easily poured into the ingot mold by manually turning the handle outside the furnace. The ingot mold can be designed to be water-cooled. The upper part of the crucible is equipped with a temperature measuring device.