Payment & Shipping Terms:
|Loading Capacity:||5-20kg||MF Rated Power:||35kw|
|Power Input Voltage:||380V||Melting Frequency:||2500HZ|
|Melting Rate:||0.15T/hour||Power Consumption:||0.8kwh/kg|
|Induction Coil Votlage:||1000V||Rated Temperature:||1700℃|
30kw Copper Melting Equipment,
High Frequency Copper Melting Equipment,
30kw Tin Iron Melting Furnace
INTRODUCTION of Tin Iron Melting Furnace:
MF Induction Tin Iron Melting Furnace mainly used in melting point is lower than 1700. C metal melting and purification, fusion metal alloy material.This Melting furnace is widely used in industry production for metallurgy, casting, alloy workpiece manufacturing etc.Also by the laboratory select and use for metallurgy process research, casting process research, alloy process research, etc.Because it does not produce by waste gas, waste water and noise etc.,does not polluting the environment, so it is replacing the traditional metal smelting melting equipment.
FEATURES & PERFORMANCE of Tin Iron Melting Furnace:
1. Using a zero-voltage scanning soft-start mode, in any case may at any time to start or stop, will not have impact on power supply.
2. Fast smelting with low production cost; low-pollution and environment-friendly ;
3. A direct effect from the cold furnace melting. Dissolved material will be fully dumped clean. Molten material easy to replace.
4. Power adjustment flexibility. Be able to continuously smooth adjustment. Temperature uniformity can be easily controlled. Oxidation burning less. Metal components evenly.
5. Furnace shell using cast aluminum or steel structure, small footprint; furnace flip dump convenience, according to the need to use electric, manual, hydraulic tilting furnace and other means.
6. Designed to automatically adjust angle of inverter circuit that can automatically adjust the load impedance match, without adjustment of capacitance compensation and always run the equipment in good working condition; power supply system diagnostic error function, easy maintenance.
Technical parameter of Tin Iron Melting Furnace
|Max loading capacity||stainless steel||gold silver copper bronze||aluminum|
|for kinds of metal|
|MF-15 15KW furnace||3kg||10kg||3kg|
|MF-25 25KW furnace||5kg||20kg||5kg|
|MF-35 35KW furnace||10kg||30kg||10kg|
|MF-45 45KW furnace||18kg||50kg||18kg|
|MF-70 70KW furnace||25kg||100kg||25kg|
|MF-90 90KW furnace||40kg||120kg||40kg|
|MF-110 110KW furnace||50kg||150kg||50kg|
|MF-160 160KW furnace||100kg||250kg||100kg|
Packing & Shipping for Tin Iron Melting Furnace
Small induction tin iron melting furnace will be packed by standard plywood case for exporting ;
Suppose your order is of big volume or 1pc furnace with large capacity, the products will be delivered by 20GP or 40GP container. Top open container is optional as well.
Warranty for tin iron melting furnace
Contact Person: Vera Zuo