Payment & Shipping Terms:
|Name:||Gas Carburizing Furnace||Model:||RQ3-35-9|
|Rated Temp:||950C||Rated Voltage:||380/440V|
|Rated Power:||35KW||Working Zone:||Dia.300*600mm|
|Function:||For Low Carbon Steel||Dimension:||1590x1410x2230mm|
|Warranty:||12 Months||Pipe Material:||Stainless Steel|
resistance heating furnace,
continuous carburizing furnace
Introduction of vertical gas carburizing furnace:
The high temperature controlled gas carburizing furnace, mainly be used for protective atmosphere carburizing, quenching. Suitable for variety of workpieces carburizing, carbonitriding infiltration , multicomponent permeation heat treatment process.
Applicable for bright anealing tempering of carbon steel, alloy steel parts and magnetic materials in protective atmosphere, and for bright anealing of small batch of scrolling strips.
Parts Description of vertical carburizing furnace:
1), Shell:made by steel plate and structural steel.
2), Inside of furnace cover: made by stainless steel plate.
3), Burner liner: using the super light and energy conservation micropore fire-resistant heat reserving brick
4), Aluminum silicate fiber at between burner liner and shell, and also fill full of thermo-insulating power in gap.
5), Resistance wire: use the 0Cr25Al5 high resistor alloy wire installed upon brick.
6), Furnace cover: use the manual lever lifter or motor-driven or hydraulic.
7) , We have installed fan which made by a heat-resistance stainless steel shaft and fan blade for uniform heating the work-piece
8), Limit switch installed near the lifter device for safety operation.
Characteristics of gas carburizing furnace:
1) Rational structure, uniform furnace temperature, small upper & lower temperature difference in working zone, especially applicable for heating and heat treatment for long axial work-piece.
2) Adopt energy-saving furnace lining, fast temperature rise, low empty furnace consumption, save more than 20% of energy compare with old product.
3) The control system can be equipped with normal control instrument or instrument with micro-processor program control according to actual need.
4) When needed during process, protective atmosphere can be fed into the furnace to realize little-oxidizing heating.
5) Each product is installed with safety interlock and over-temperature device to provide reliable and safe operation and use.
Standard models of SUPER gas carburizing furnace:
Well- type Gas
|RQ3-25-9||25 kw||3P. 380 V||950.C||Φ300*450mm||
Applicable for carburizing of steel parts,
protective atmosphere quenching and
other heat treatment
|RQ3-35-9||35 kw||3P. 380 V||950.C||Φ300*600mm|
|RQ3-60-9||60 kw||3P. 380 V||950.C||Φ450*600mm|
|RQ3-75-9||75 kw||3P. 380 V||950.C||Φ450*900mm|
|RQ3-90-9||90 kw||3P. 380 V||950.C||Φ600*900mm|
|RQ3-105-9||105kw||3P. 380 V||950.C||Φ600*1200mm|
Special requriement is also avaialble .
Contact Person: Vera Zuo