Payment & Shipping Terms:
|Goods Name:||Metal Scrap Melting Induction Furnace||Rated Temperature:||1650℃|
|Loading Capacity:||50KG Copper||Rated Power:||45KW|
|Input Voltage:||380V||Melting Rate:||30mins/batch|
|Power Loss:||0.7KWh/kg||Induction Coil Voltage:||2000V|
|Warranty:||1 Year||Type:||Intermediate Frequency Furnace|
45KW Induction Melting Furnace,
Intermediate Frequency Induction Melting Furnace,
Bronze Brass Induction Melting Furnace
Brass Alloy Melting induction furnace adopt electromagnetic induction principle manufacture, the electromagnetic field to direct effects on melt material and heat generation.So, it's heat conversion efficiency is high, does not produce waste gas pollution environment. At the same time, due to the furnace shell is made of metal materials for shielding electromagnetic field, so the environment around of furnace does not produce electromagnetic radiation pollution.
Description of Melting Electric Furnace:
1. The power cabinet body is designed with a fully enclosed structure, and the cabinet is made of 3mm steel plate. The protection class is IP54. The main power cabinet adopts a split modular design, which facilitates the installation and transportation of equipment. All the originals used in the whole system are from well-known brands with reliable quality, and they must be rigorously tested and screened after the factory.
2. This set of equipment can realize fully automatic remote control, including PLC programmable controller, HMI man-machine interface or industrial control computer system, industrial control configuration software and various sensors. It can realize automatic operation,such as automatic constant temperature, automatic oven and anti-wearing furnace alarm, which is safer and more convenient to use.
3. This series resonant dual-supply Intermediate frequency power supply is also equipped with a computer-aided management system. Not only can display real-time data and information of power supply operation, but also display the operating status and information of the entire system, and has functions such as automatic insulation, oven, furnace start, and fault archiving.
Models of Melting Electric Furnace:
|Loading capacity (max)||Steel ,stainless steel||Gold, silver, copper, bronze||aluminum|
|MF-15 15KW furnace||3kg||10kg||3kg|
|MF-25 25KW furnace||5kg||20kg||5kg|
|MF-35 35KW furnace||10kg||30kg||10kg|
|MF-45 45KW furnace||18kg||50kg||18kg|
|MF-70 70KW furnace||25kg||100kg||25kg|
|MF-90 90KW furnace||40kg||120kg||40kg|
|MF-110 110KW furnace||50kg||150kg||50kg|
|MF-160 160KW furnace||100kg||250kg||100kg|
Metal Scrap Melting Induction Electric Furnace Performance
1. Using a zero-voltage scanning soft-start mode, in any case may at any time to start or stop, will not have impact on power supply.
2. Fast smelting with low production cost; low-pollution and environment-friendly ;
3. A direct effect from the cold furnace melting. Dissolved material will be fully dumped clean. Molten material easy to replace.
4. Power adjustment flexibility. Be able to continuously smooth adjustment. Temperature uniformity can be easily controlled. Oxidation burning less. Metal components evenly.
5. Furnace shell using cast aluminum or steel structure, small footprint; furnace flip dump convenience, according to the need to use electric, manual, hydraulic tilting furnace and other means.
6. Designed to automatically adjust angle of inverter circuit that can automatically adjust the load impedance match, without adjustment of capacitance compensation and always run the equipment in good working condition; power supply system diagnostic error function, easy maintenance.
Contact Person: Vera Zuo