Payment & Shipping Terms:
|Goods:||Metal Ingot Producing Graphite Crucbile||Volume:||3kg Gold|
|Top Diameter:||20-1000mm||Bottom Diameter:||40-1000mm|
|Material:||High Purity Graphite||Compressive Strength:||70MPa|
|Content: 99.99% Graphite:||99.99% Graphite||Working Temp.:||Up To 1600C|
|Type:||Graphite Crucible||Size:||Clients' Requirements|
graphite melting crucible,
metal casting crucible
Application of graphite crucibles:
Performance of metal melting crucible :
1. Thermal stability: According to the quench acute thermal using conditions of graphite crucible, we will specially design the production procedure, so as to ensure the reliability of product quality.
2. Corrosion resistance: Even and fine basic design will delay the erosion of crucible.
3. Impact resistance: Graphite crucible can bear high thermal impact, so any process can be carried out.
4. Acid resistance: The adding of special materials will greatly improve the quality of crucible, especially its index of acid resistance., and will prolong the service life of graphite crucible.
5. High heat Conduction: High content of fixed carbon ensures the good heat conduction, shorten the time of dissolution, and remarkably reduce the energy consumption.
6. Control of metal pollution: The component of material under strict control will ensure that graphite crucible will not pollute the metals when dissolving.
7. Quality stability: The process technology of forming under high pressure and quality guarantee system will fully ensure the stability of quality.
1. Graphite crucible cannot be exposed in moisture, and must be placed in indoor dry place or wooden shelf. Maintain ventilated. Moisture is strictly prohibited. Damped crucible is likely to crack.
2. The melting time for the first time should be at least twice of the normal melting time, in order to avoid cracking inside the crucible due to heating up too fast, or even cracking immediately when the fire sets on.
3. Handle with care. Falling or shaking is strictly forbidden in order to present cracking. Crucible should be placed below the mouth of furnace to prevent the furnace lid abrading the upper edge of the crucible and thus affecting the capacity.
Standard models of SUPER graphite crucible :
|Product name||type||size(mm)||Weight of the product(g)|
|1kg graphite crucible||SP-1000||58||47||35||88||160|
|2kg graphite crucible||SP-2000||65||58||44||110||240|
|2kg ceramic crucible||SP-2000A||81||70||60||110||270|
|2.5kg graphite crucible||SP-2500||65||58||44||126||300|
|2.5kg ceramic crucible||SP-2500A||81.4||71.4||60||127.5||320|
|3kg graphite crucible||SP-3000||85||75||60||105||390|
|3kg ceramic crucible||SP-3000A||97||88||78||103||335|
Contact Person: Ms. Vera Zuo