Payment & Shipping Terms:
|Power Supply:||AC110/220V±10%, 50/60HZ||Weight Range:||0.005-600g|
|Readability:||0.001g/cm3||Measuring Time:||5 Seconds|
|Measuring Principle:||Archimedes Principle||Plug Type:||As Demands|
|Standard Deviation:||0.005g||Gross Weight:||4.5kg|
|Name:||Metal Purity Analyser||Testing Board:||ABS Injection Moulding|
gold purity checking machine,
precious metal analyzer
Metal Purity Analyser Meter Specifications:
The high-precision digital solid density test equipment is mainly used in rubber, plastic, wire and cable, food, composite materials, shoe materials, glass, precious metal hardware recovery and other industries. Solids, granules, thin-film body, the floating body, a powder body of the sample can be directly read out the average weight, the average weight in the water, and the specific gravity value, density, volume, the percentage in the
air,convenient and quick.
Metal Purity Analyser Meter Apply to
Metal Purity Analyser Meter
1, as long as 10 seconds (two steps) can be directly read the specific gravity, the volume value, purity%.
2, the proportion of parts molding, will not cause water leakage.
3, RS-232C computer interface, and can be easily connected to the PC and printer.
4, using the design of the large tank , to reduce the error caused by the buoyancy of the hanging bar line.
5, can be directly set the temperature compensation setting solution compensation setting.
6, the smallest weighing precision 0.005g, the proportion of calculus precision 0.001g.7, we can set the standard density value of materials, direct read Purity%.8, the use of corrosive liquids, optional anti-corrosion sink.
Density tester technical parameter :
|Testing board||ABS injection moulding|
|Result display||Apparent density,volume density,wet density,overall porosity,effective porosity,open pore volume,bulk volume,oil content,water absorption|
|Measuring time||About 5 seconds|
|Unobstructed without lifting lid design|
|Water tank||Completed injection moulding transparent PC water tank(size:length15.3 cm×witdth10.7 cm×height9.3cm)|
|Parameter setting||Water temperature setting,measuring medium density setting,primary materials and secondary materials setting,air density setting,suspension wire buoyancy deviation setting|
|Calibration method||Single key calibration,automatically testing|
(1) host(2)water tank(3)testing board(4)tweezers(5)thermometers
(6)weight(7)windproof dustproof cover(8)power transformer
|interface||Standard RS-232 interface|
|Optional accessories||SP-40 printer,data connecting wire|
|Power supply||AC100V~240V 50HZ/60HZ (Europe standard)|
Metal Purity Analyser Meter Measurement Procedure
a) measure the gold weight in air,and then press the ENTER button to memory.
b) Place the gold into water to measure the weight,and then press the ENTER button to memory.show the K value of gold,purity percent,density value.
Metal Purity Analyser Meter Standard accessories
Host,sink,test board,tweezer,thermometer,weight,wind and dust cover,a set of measuring particle parts,a set of measuring floating body parts,power transformer.
Contact us feel free if you have any special requirement .
Contact Person: Vera Zuo